Overview
In Method 1, we see very basic information on the Operator Portal. This method is for Sites that want manual entry of basic information on an hour by hour (customizable) basis.
- Actual Product
- Pitch Actual
- Scrap
- Operator Count
- Downtime (taken from Dispatches)
Setup
For this method, you'll need to setup a few things. Using the following articles, you'll learn how to add products and scrap to your site.
- Product Categories can be used to group products together that use the same or similar inspection limits. If you want to use product categories, you can see how to set them up here: https://support.leading2lean.com/hc/en-us/articles/360048365671--Production-Product-Categories
- To see how to set up Products, use this article: https://support.leading2lean.com/hc/en-us/articles/360035528751--Production-Products-Components
- For scrap set up: https://support.leading2lean.com/hc/en-us/articles/360016195152-Defect-Scrap-Categories-Types-Classification
- There are several different methods of assigning scrap in L2L; the default method, by category, by product, or by machine. For more information on those methods, see this article: https://support.leading2lean.com/hc/en-us/articles/360061405831-Methods-of-Documenting-Scrap
Settings
You can use the default settings for this method. In a previous lesson you should have reviewed the pitch start of day and the pitch length.
*You can also disable the planned product in the production settings if you don't intend to use it.