There are two standard system statuses available in the system: Idle and In Use. The Idle Status is used when the tooling is no longer in use and is waiting for the next model. In Use is used when the Tooling is on the machine and cycles are counting against it. Note: Putting the Tooling in Idle status while associated with a machine continues to count cycles against it. A best practice is to remove the tooling from the machine when not in use and associate it with a machine called 'back shop' for example.
You can add Site Statuses.
- Go to the ‘Setup’ menu and click ‘Tooling Statuses’
- Click ‘Add New’ located in the upper right corner on the ‘Tooling Statuses’ bar.
- Enter a description.
- Select Active.
- Enable for updating cycle counts.
- Click ‘Save’.